The SMALLRIG Universal Phone Holder Mount review is for creators who want to attach a phone to a camera or tripod and adjust its orientation without changing the mounting setup.
Its broad phone-width range, two adjustable joints, and top cold shoe make it useful for compact filming and streaming rigs.
Universal Phone Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount
A flexible camera or tripod phone clamp for creators who want portrait and landscape framing with a top cold shoe for a light or microphone.
- Fits smartphones 57–88 mm (about 2.5–3.5 inches) wide.
- Attaches through a bottom 1/4-inch-20 threaded hole or cold shoe.
- Switches between landscape and portrait orientation, locking when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
Pros
- Offers both threaded and cold-shoe mounting at the base.
- Makes portrait-to-landscape changes part of the holder rather than requiring a different mount.
Consider before buying
- Phone fit depends on width, so a phone near either range limit should be measured with its case attached.
- The 500 g capacity applies to the mounted load; phone and attached accessories all contribute to it.
Read the full review summary
This clamp combines a 1/4-inch-20 threaded hole and a cold shoe at its base, so it can attach to compatible camera or tripod setups.
A second cold shoe sits on top for an accessory such as a microphone or light, while threaded holes provide additional mounting points for compatible power-bank holders.
The holder supports phones 57–88 mm wide and rotates between landscape and portrait orientation, with two joints offering up to 180 degrees of adjustment.
It suits creators who want a manually positioned phone mount and accessory points in one compact piece. Check your phone’s width with its case attached, and keep the full load within the 500 g capacity.
The buying factors
Universal Phone Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Phone compatibility
The 57–88 mm width range accommodates many phones, though buyers should measure the phone with any case they plan to use.
Mounting flexibility
A bottom 1/4-inch-20 thread and cold shoe support two common mounting approaches.
Orientation control
The holder switches between portrait and landscape and has two joints for angle adjustment.
Accessory expansion
A top cold shoe and additional threaded holes provide places for compatible accessories.
Portability
At 73 g, the holder adds little weight to a compact camera or tripod setup.
Load guidance
The 500 g maximum gives a clear overall load limit, which buyers must account for when adding a phone and accessories.
Key Features and Specifications of Universal Phone Mount
- Fits smartphones 57–88 mm (about 2.5–3.5 inches) wide.
- Attaches through a bottom 1/4-inch-20 threaded hole or cold shoe.
- Switches between landscape and portrait orientation, locking when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
- Top cold shoe accommodates a compatible microphone or light.
- Multiple threaded holes support compatible power-bank holders; maximum load capacity is 500 g.
- Weighs 73 g and is made with aluminum, stainless steel, and silicone.
Pros and Cons of Universal Phone Mount
Pros
- Offers both threaded and cold-shoe mounting at the base.
- Makes portrait-to-landscape changes part of the holder rather than requiring a different mount.
- Adds a top cold shoe and threaded accessory points for building a compact rig.
- The stated phone-width range covers many common smartphone sizes.
Consider before buying
- Phone fit depends on width, so a phone near either range limit should be measured with its case attached.
- The 500 g capacity applies to the mounted load; phone and attached accessories all contribute to it.
- Users who want a mount that attaches magnetically may prefer a different mounting approach.
Who Should Buy Universal Phone Mount?
Good fit
Consider this holder if you film with a phone on a camera or tripod and regularly change between portrait and landscape framing.
Its two joints add positioning flexibility, and the 1/4-inch-20 thread and bottom cold shoe give you options for connecting it to compatible support gear.
It also makes sense when you want a microphone or light on the phone rig.
Before choosing it, confirm that your phone falls within the 57–88 mm width range and that the combined mounted load stays at or below 500 g.
Check that your camera, tripod, or other support has the matching mounting point.
Who should skip it
Skip it if you need a magnetic attachment workflow or your phone’s width with its case is outside the stated range. Also choose another setup if the phone and planned accessories together exceed the 500 g maximum.
How the Universal Phone Mount Fits a Creator Rig
Mounting options for camera and tripod setups
A bottom 1/4-inch-20 threaded hole and a cold shoe cover two common ways to attach a phone holder to a camera or tripod rig.
That flexibility can be useful when a creator moves between different support setups, provided each one has a compatible connection.
Orientation changes and angle adjustment
The holder switches between landscape and portrait and locks after a 90-degree rotation.
Its two rotary joints offer up to 180 degrees of adjustment, which lets users reposition the phone for different shots or filming arrangements without changing the base mount.
Accessory points and total load
A cold shoe on top creates a mounting point for a compatible microphone or light, while the threaded holes can support compatible power-bank holders.
The stated 500 g maximum makes the full rig’s weight a practical constraint, so include the phone and any accessories when checking the load.
Phone fit and carrying weight
The 57–88 mm phone-width range gives buyers a concrete fit check, and the mount itself weighs 73 g. Measure with the intended case in place, since the case changes the width the clamp must accommodate.
Alternatives to Universal Phone Mount
One relevant alternative is included; compare the mounting style and phone compatibility that fit your filming routine before choosing another option.
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount with Cold Shoe Mount
Choose the Universal Phone Holder if you want a clamp that accommodates phones by width.
The Magnetic Metal Phone Mount is a better fit for a compatible MagSafe iPhone when quick magnetic attachment matters, provided that attachment style suits your setup.
- The Magnetic Metal Phone Mount is designed for iPhone models with MagSafe functionality and uses a magnetic attachment.
- It has dual rotating shafts, a bottom 1/4-inch-20 thread and cold shoe, threaded accessory points, and a 500 g load capacity; the supplied description cautions that external impacts can cause detachment.
- The Universal Phone Holder uses a width-adjustable clamp for phones 57–88 mm wide, with two rotary joints and a 500 g maximum load.
Is Universal Phone Mount Worth It?
The SMALLRIG Universal Phone Holder Mount is worth considering for creators who want a compact clamp with portrait and landscape positioning, flexible mounting at the base, and a top cold shoe for an accessory.
Its broad stated width range and light weight make it suitable for many portable camera or tripod setups.
Measure your phone with its case, confirm your support’s connection, and account for the combined load before buying. If you prefer magnetic attachment and have a compatible iPhone, the alternative mounting style may better match your routine.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount
A flexible camera or tripod phone clamp for creators who want portrait and landscape framing with a top cold shoe for a light or microphone.
- Fits smartphones 57–88 mm (about 2.5–3.5 inches) wide.
- Attaches through a bottom 1/4-inch-20 threaded hole or cold shoe.
- Switches between landscape and portrait orientation, locking when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.